Xylose- and Nucleoside-Based Polymers via Thiol-ene Polymerization toward Sugar-Derived Solid Polymer Electrolytes.

A series of copolymers have been prepared via thiol-ene polymerization of bioderived α,ω-unsaturated diene monomers with dithiols toward application as solid polymer electrolytes (SPEs) for Li+-ion conduction. Amorphous polyesters and polyethers with low Tg's (-31 to -11 °C) were first prepared from xylose-based monomers (with varying lengths of fatty acid moiety) and 2,2'-(ethylenedioxy)diethanethiol (EDT). Cross-linking by incorporation of a trifunctional monomer also produced a series of SPEs with ionic conductivities up to 2.2 × 10-5 S cm-1 at 60 °C and electrochemical stability up to 5.08 V, a significant improvement over previous xylose-derived materials. Furthermore, a series of copolymers bearing nucleoside moieties were prepared to exploit the complementary base-pairing interaction of nucleobases. Flexible, transparent, and reprocessable SPE films were thus prepared with improved ionic conductivity (up to 1.5 × 10-4 S cm-1 at 60 °C), hydrolytic degradability, and potential self-healing capabilities.

Unexpected Periodicity in Cationic Group 5 Initiators for the Ring-Opening Polymerization of Lactones.

ε-Caprolactone (ε-CL) adducts of cationic, amine tris(phenolate)-supported niobium(V) and tantalum(V) ethoxides initiate the ring-opening polymerization of lactones. The Ta(V) species prepared and applied catalytically herein exhibits higher activity in the ring-opening polymerization (ROP) of ε-caprolactone than the previously reported, isostructural Nb(V) complex, contradicting literature comparisons of Nb(V)- and Ta(V)-based protocols. Both systems also initiate the ROP of δ-valerolactone and rac-ß-butyrolactone, kinetic studies confirming retention of higher activity by the Ta congener. Polymerizations of rac-ß-butyrolactone and δ-valerolactone were previously unrealized under Group V- or Ta-mediated conditions, respectively, although the former has afforded only low molecular weight, cyclic poly-3-hydroxybutyrate. Cationic ethoxo-Nb(V) and -Ta(V) δ-valerolactone adducts are also reported, demonstrating the facility of δ-valerolactone as a ligand and the generality of the synthetic method. Both δ-valerolactone-bearing complexes initiate the ROP of ε-caprolactone, δ-valerolactone, and rac-ß-butyrolactone. Accordingly, we have elucidated trends in reactivity and investigated the initiation mechanism for such systems, the insertion event being predicated upon intramolecular nucleophilic attack on the coordinated lactone by the adjacent alkoxide moiety. This mechanism enables quantitative, stoichiometric installation of a single monomer residue distinct from the bulk of the polymer chain, and permits modification of polymer properties via both manipulation of the molecular architecture and tuning of the polymerization kinetics, and thus dispersity, through hitherto inaccessible independent control of the initiation event.

Evaluating Heterodinuclear Mg(II)M(II) (M = Mn, Fe, Ni, Cu, and Zn) Catalysts for the Chemical Recycling of Poly(cyclohexene carbonate).

Polymer chemical recycling to monomers (CRM) is important to help achieve a circular plastic economy, but the "rules" governing catalyst design for such processes remain unclear. Here, carbon dioxide-derived polycarbonates undergo CRM to produce epoxides and carbon dioxide. A series of dinuclear catalysts, Mg(II)M(II) where M(II) = Mg, Mn, Fe, Co, Ni, Cu, and Zn, are compared for poly(cyclohexene carbonate) depolymerizations. The recycling is conducted in the solid state, at 140 °C monitored using thermal gravimetric analyses, or performed at larger-scale using laboratory glassware. The most active catalysts are, in order of decreasing rate, Mg(II)Co(II), Mg(II)Ni(II), and Mg(II)Zn(II), with the highest activity reaching 8100 h-1 and with >99% selectivity for cyclohexene oxide. Both the activity and selectivity values are the highest yet reported in this field, and the catalysts operate at low loadings and moderate temperatures (from 1:300 to 1:5000, 140 °C). For the best heterodinuclear catalysts, the depolymerization kinetics and activation barriers are determined. The rates in both reverse depolymerization and forward CHO/CO2 polymerization catalysis show broadly similar trends, but the processes feature different intermediates; forward polymerization depends upon a metal-carbonate intermediate, while reverse depolymerization depends upon a metal-alkoxide intermediate. These dinuclear catalysts are attractive for the chemical recycling of carbon dioxide-derived plastics and should be prioritized for recycling of other oxygenated polymers and copolymers, including polyesters and polyethers. This work provides insights into the factors controlling depolymerization catalysis and steers future recycling catalyst design toward exploitation of lightweight and abundant s-block metals, such as Mg(II).

Radical Ring Opening Polymerization of Cyclic Ketene Acetals Derived From d-Glucal.

A cyclic ketene acetal (CKA) derived from d-glucal was synthesized, and its polymerization using free radicals has been investigated. NMR analysis of the resulting polymers revealed the formation of polyacetal-polyester copolymers, with up to 78% of ester linkages formed by radical ring-opening polymerization (rROP). Conversely, the polymerization of the monomer-saturated analogue only produced acetal linkages, demonstrating that the alkene functionality within the d-glucal pyranose ring is essential to promote ring-opening and ester formation, likely via the stabilization of an allyl radical. The thermal properties of the polymers were linked to the ratio of the ester and acetal linkages. Copolymerization with methyl methacrylate (MMA) afforded statistically PMMA-rich copolymers (66-98%) with linkages prone to hydrolytic degradation and decreased glass-transition temperatures. The retention of the pseudoglucal alkene function offers opportunities to functionalize further these bioderived (co)polymers.

Chemical Recycling of Commercial Poly(l-lactic acid) to l-Lactide Using a High-Performance Sn(II)/Alcohol Catalyst System.

Poly(l-lactic acid) (PLLA) is a leading commercial polymer produced from biomass, showing useful properties for plastics and fiber applications; after use, it is compostable. One area for improvement is postconsumer waste PLLA chemical recycling to monomer (CRM), i.e., the formation of l-lactide (l-LA) from waste plastic. This process is currently feasible at high reaction temperatures and shows low catalytic activity accompanied, in some cases, by side reactions, including epimerization. Here, a commercial Sn(II) catalyst, applied with nonvolatile commercial alcohol, enables highly efficient CRM of PLLA to yield l-LA in excellent yield and purity (92% yield, >99% l-LA from theoretical max.). The depolymerization is performed using neat polymer films at low temperatures (160 °C) under a nitrogen flow or vacuum. The chemical recycling operates with outstanding activity, achieving turnover frequencies which are up to 3000× higher than previously excellent catalysts and applied at loadings up to 6000× lower than previously leading catalysts. The catalyst system achieves a TOF = 3000 h-1 at 0.01 mol % or 1:10,000 catalyst:PLLA loading. The depolymerization of waste PLLA plastic packaging (coffee cup lids) produces pure l-LA in excellent yield and selectivity. The new catalyst system (Sn + alcohol) can itself be recycled four times in different PLLA "batch degradations" and maintains its high catalytic productivity, activity, and selectivity.

Coordination of ε-Caprolactone to a Cationic Niobium(V) Alkoxide Complex: Fundamental Insight into Ring-Opening Polymerization via Coordination-Insertion.

We report three niobium-based initiators for the catalytic ring-opening polymerization (ROP) of ε-caprolactone, exhibiting good activity and molecular weight control. In particular, we have prepared on the gram-scale and fully characterized a monometallic cationic alkoxo-Nb(V) ε-caprolactone adduct representing, to the best of our knowledge, an unprecedented example of a metal complex with an intact lactone monomer and a functional ROP-initiating group simultaneously coordinated at the metal center. At 80 °C, all three systems initiate the immortal solution-state ROP of ε-caprolactone via a coordination-insertion mechanism, which has been confirmed through experimental studies, and is supported by computational data. Natural bond orbital calculations further indicate that polymerization may necessitate isomerization about the metal center between the alkoxide chain and the coordinated monomer. The observations made in this work are expected to inform mechanistic understanding both of amine tris(phenolate)-supported metal alkoxide ROP initiators, including various highly stereoselective systems for the polymerization of lactides and of coordination-insertion-type ROP protocols more broadly.

Correlating Metal Redox Potentials to Co(III)K(I) Catalyst Performances in Carbon Dioxide and Propene Oxide Ring Opening Copolymerization.

Carbon dioxide copolymerization is a front-runner CO2 utilization strategy but its viability depends on improving the catalysis. So far, catalyst structure-performance correlations have not been straightforward, limiting the ability to predict how to improve both catalytic activity and selectivity. Here, a simple measure of a catalyst ground-state parameter, metal reduction potential, directly correlates with both polymerization activity and selectivity. It is applied to compare performances of 6 new heterodinuclear Co(III)K(I) catalysts for propene oxide (PO)/CO2 ring opening copolymerization (ROCOP) producing poly(propene carbonate) (PPC). The best catalyst shows an excellent turnover frequency of 389 h-1 and high PPC selectivity of >99 % (50 °C, 20 bar, 0.025 mol% catalyst). As demonstration of its utility, neither DFT calculations nor ligand Hammett parameter analyses are viable predictors. It is proposed that the cobalt redox potential informs upon the active site electron density with a more electron rich cobalt centre showing better performances. The method may be widely applicable and is recommended to guide future catalyst discovery for other (co)polymerizations and carbon dioxide utilizations.

Cross-Linking of Sugar-Derived Polyethers and Boronic Acids for Renewable, Self-Healing, and Single-Ion Conducting Organogel Polymer Electrolytes.

This report describes the synthesis and characterization of organogels by reaction of a diol-containing polyether, derived from the sugar d-xylose, with 1,4-phenylenediboronic acid (PDBA). The cross-linked materials were analyzed by infrared spectroscopy (FT-IR), thermal gravimetric analysis (TGA), scanning electron microscopy (FE-SEM), and rheology. The rheological material properties could be tuned: gel or viscoelastic behavior depended on the concentration of polymer, and mechanical stiffness increased with the amount of PDBA cross-linker. Organogels demonstrated self-healing capabilities and recovered their storage and loss moduli instantaneously after application and subsequent strain release. Lithiated organogels were synthesized through incorporation of lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) into the cross-linked matrix. These lithium-borate polymer gels showed a high ionic conductivity value of up to 3.71 × 10-3 S cm-1 at 25 °C, high lithium transference numbers (t + = 0.88-0.92), and electrochemical stability (4.51 V). The gels were compatible with lithium-metal electrodes, showing stable polarization profiles in plating/stripping tests. This system provides a promising platform for the production of self-healing gel polymer electrolytes (GPEs) derived from renewable feedstocks for battery applications.

A Highly Active and Selective Zirconium-Based Catalyst System for the Industrial Production of Poly(lactic acid).

The biodegradable, aliphatic polyester poly(lactic acid), PLA, is a leading bio-based alternative to petrochemical-derived plastic materials across a range of applications. Widely reported in the available literature as a benchmark for PLA production via the bulk ring-opening polymerization of lactides is the use of divalent tin catalysts, and particularly tin(II) bis(2-ethylhexanoate). We present an alternative zirconium-based system that combines an inexpensive Group IV metal with the robustness, high activity, control, and designed compatibility with existing facilities and processes, that are required for industrial use. We have carried out a comprehensive kinetic study and applied a combined experimental and theoretical approach to understanding the mechanism by which the polymerization of lactide proceeds in the presence of this system. In the laboratory-scale (20 g) polymerization of recrystallized racemic d,l-lactide (rac-lactide), we have measured catalyst turnover frequencies up to at least 56,000 h-1, and confirmed the reported protocols' resistance toward undesirable epimerization, transesterification, and chain scission processes, deleterious to the properties of the polymer product. Further optimization and scale-up under industrial conditions have confirmed the relevance of the catalytic protocol to the commercial production of melt-polymerized PLA. We were able to undertake the efficient preparation of high-molecular-weight PLA on the 500-2000 g scale, via the selective and well-controlled polymerization of commercial polymer-grade l-lactide under challenging, industrially relevant conditions, and at metal concentrations as low as 8-12 ppm Zr by weight ([Zr] = 1.3 × 10-3 to 1.9 × 10-3 mol %). Under those conditions, a catalyst turnover number of at least 60,000 was attained, and the activity of the catalyst was comparable to that of tin(II) bis(2-ethylhexanoate).

Insights into the Mechanism of Carbon Dioxide and Propylene Oxide Ring-Opening Copolymerization Using a Co(III)/K(I) Heterodinuclear Catalyst.

A combined computational and experimental investigation into the catalytic cycle of carbon dioxide and propylene oxide ring-opening copolymerization is presented using a Co(III)K(I) heterodinuclear complex (Deacy, A. C. Co(III)/Alkali-Metal(I) Heterodinuclear Catalysts for the Ring-Opening Copolymerization of CO2 and Propylene Oxide. J. Am. Chem. Soc. 2020, 142(45), 19150-19160). The complex is a rare example of a dinuclear catalyst, which is active for the copolymerization of CO2 and propylene oxide, a large-scale commercial product. Understanding the mechanisms for both product and byproduct formation is essential for rational catalyst improvements, but there are very few other mechanistic studies using these monomers. The investigation suggests that cobalt serves both to activate propylene oxide and to stabilize the catalytic intermediates, while potassium provides a transient carbonate nucleophile that ring-opens the activated propylene oxide. Density functional theory (DFT) calculations indicate that reverse roles for the metals have inaccessibly high energy barriers and are unlikely to occur under experimental conditions. The rate-determining step is calculated as the ring opening of the propylene oxide (ΔGcalc† = +22.2 kcal mol-1); consistent with experimental measurements (ΔGexp† = +22.1 kcal mol-1, 50 °C). The calculated barrier to the selectivity limiting step, i.e., backbiting from the alkoxide intermediate to form propylene carbonate (ΔGcalc† = +21.4 kcal mol-1), is competitive with the barrier to epoxide ring opening (ΔGcalc† = +22.2 kcal mol-1) implicating an equilibrium between alkoxide and carbonate intermediates. This idea is tested experimentally and is controlled by carbon dioxide pressure or temperature to moderate selectivity. The catalytic mechanism, supported by theoretical and experimental investigations, should help to guide future catalyst design and optimization.

Solid-State Chemical Recycling of Polycarbonates to Epoxides and Carbon Dioxide Using a Heterodinuclear Mg(II)Co(II) Catalyst.

Polymer chemical recycling to monomers (CRM) could help improve polymer sustainability, but its implementation requires much better understanding of depolymerization catalysis, ensuring high rates and selectivity. Here, a heterodinuclear [Mg(II)Co(II)] catalyst is applied for CRM of aliphatic polycarbonates, including poly(cyclohexene carbonate) (PCHC), to epoxides and carbon dioxide using solid-state conditions, in contrast with many other CRM strategies that rely on high dilution. The depolymerizations are performed in the solid state giving very high activity and selectivity (PCHC, TOF = 25700 h-1, CHO selectivity >99 %, 0.02 mol %, 140 °C). Reactions may also be performed in air without impacting on the rate or selectivity of epoxide formation. The depolymerization can be performed on a 2 g scale to isolate the epoxides in up to 95 % yield with >99 % selectivity. In addition, the catalyst can be re-used four times without compromising its productivity or selectivity.

Understanding the Effects of Cross-Linking Density on the Self-Healing Performance of Epoxidized Natural Rubber and Natural Rubber.

The demand for self-healing elastomers is increasing due to the potential opportunities such materials offer in reducing down-time and cost through extended product lifetimes and reduction of waste. However, further understanding of self-healing mechanisms and processes is required in order to develop a wider range of commercially applicable materials with self-healing properties. Epoxidized natural rubber (ENR) is a derivative of polyisoprene. ENR25 and ENR50 are commercially available materials with 25 and 50 mol % epoxidation, respectively. Recently, reports of the use of ENR in self-healing materials have begun to emerge. However, to date, there has been limited analysis of the self-healing mechanism at the molecular level. The aim of this work is to gain understanding of the relevant self-healing mechanisms through systematic characterization and analysis of the effect of cross-linking on the self-healing performance of ENR and natural rubber (NR). In our study, cross-linking of ENR and NR with dicumyl peroxide and sulfur to provide realistic models of commercial rubber formulations is described, and a cross-linking density of 5 × 10-5 mol cm-3 in sulfur-cured ENR is demonstrated to achieve a healing efficiency of 143% for the tensile strength. This work provides the foundation for further modification of ENR, with the goal of understanding and controlling ENR's self-healing ability for future applications.

Chemical Recycling of Poly(Cyclohexene Carbonate) Using a Di-MgII Catalyst.

Chemical recycling of polymers to true monomers is pivotal for a circular plastics economy. Here, the first catalyzed chemical recycling of the widely investigated carbon dioxide derived polymer, poly(cyclohexene carbonate), to cyclohexene oxide and carbon dioxide is reported. The reaction requires dinuclear catalysis, with the di-MgII catalyst showing both high monomer selectivity (>98 %) and activity (TOF=150 h-1 , 0.33 mol %, 120 °C). The depolymerization occurs via a chain-end catalyzed depolymerization mechanism and DFT calculations indicate the high selectivity arises from Mg-alkoxide catalyzed epoxide extrusion being kinetically favorable compared to cyclic carbonate formation.

UV degradation of poly(lactic acid) materials through copolymerisation with a sugar-derived cyclic xanthate.

The copolymerisation of L-Lactide with a cyclic xanthate monomer derived from tri-O-acetyl-D-glucal has been used to incorporate thionocarbonate and thioester linkages into a polyester backbone. The poly(lactide-co-xanthate) copolymers show enhanced UV-degradability compared to PLA, with 40% mass loss within 6 hours of UV exposure (365 nm) for only 3% of sulfur-containing linkages.

Does the Configuration at the Metal Matter in Noyori-Ikariya Type Asymmetric Transfer Hydrogenation Catalysts?

Noyori-Ikariya type [(arene)RuCl(TsDPEN)] (TsDPEN, sulfonated diphenyl ethylenediamine) complexes are widely used C=O and C=N reduction catalysts that produce chiral alcohols and amines via a key ruthenium-hydride intermediate that determines the stereochemistry of the product. Whereas many details about the interactions of the pro-chiral substrate with the hydride complex and the nature of the hydrogen transfer from the latter to the former have been investigated over the past 25 years, the role of the stereochemical configuration at the stereogenic ruthenium center in the catalysis has not been elucidated so far. Using operando FlowNMR spectroscopy and nuclear Overhauser effect spectroscopy, we show the existence of two diastereomeric hydride complexes under reaction conditions, assign their absolute configurations in solution, and monitor their interconversion during transfer hydrogenation catalysis. Configurational analysis and multifunctional density functional theory (DFT) calculations show the λ-(R,R)S Ru configured [(mesitylene)RuH(TsDPEN)] complex to be both thermodynamically and kinetically favored over its λ-(R,R)R Ru isomer with the opposite configuration at the metal. Computational analysis of both diastereomeric catalytic manifolds show the major λ-(R,R)S Ru configured [(mesitylene)RuH(TsDPEN)] complex to dominate asymmetric ketone reduction catalysis with the minor λ-(R,R)R Ru [(mesitylene)RuH(TsDPEN)] stereoisomer being both less active and less enantioselective. These findings also hold true for a tethered catalyst derivative with a propyl linker between the arene and TsDPEN ligands and thus show enantioselective transfer hydrogenation catalysis with Noyori-Ikariya complexes to proceed via a lock-and-key mechanism.

Control of Crystallinity and Stereocomplexation of Synthetic Carbohydrate Polymers from d- and l-Xylose.

Manipulating the stereochemistry of polymers is a powerful method to alter their physical properties. Despite the chirality of monosaccharides, reports on the impact of stereochemistry in natural polysaccharides and synthetic carbohydrate polymers remain absent. Herein, we report the cocrystallisation of regio- and stereoregular polyethers derived from d- and l-xylose, leading to enhanced thermal properties compared to the enantiopure polymers. To the best of our knowledge, this is the first example of a stereocomplex between carbohydrate polymers of opposite chirality. In contrast, atactic polymers obtained from a racemic mixture of monomers are amorphous. We also show that the polymer hydroxyl groups are amenable to post-polymerisation functionalization. These strategies afford a family of carbohydrate polyethers, the physical and chemical properties of which can both be controlled, and which opens new possibilities for polysaccharide mimics in biomedical applications or as advanced materials.

Combining alkali metals and zinc to harness heterometallic cooperativity in cyclic ester ring-opening polymerisation.

Heterometallic cooperativity is an emerging strategy to elevate polymerisation catalyst performance. Here, we report the first heterotrimetallic Na/Zn2 and K/Zn2 complexes supported by a ProPhenol ligand, which deliver "best of both" in cyclic ester ring-opening polymerisation, combining the outstanding activity (Na/K) and good control (Zn2) of homometallic analogues. Detailed NMR studies and density-functional theory calculations suggest that the Na/Zn2 and K/Zn2 complexes retain their heterometallic structures in the solution-state. To the best of our knowledge, the K/Zn2 analogue is the most active heterometallic catalyst reported for rac-lactide polymerisation (k obs = 1.7 × 10-2 s-1), giving activities five times faster than the Na/Zn2 complex. These versatile catalysts also display outstanding performance in ε-caprolatone and δ-valerolactone ring-opening polymerisation. These studies provide underpinning methodologies for future heterometallic polymerisation catalyst design, both in cyclic ester polymerisation and other ring-opening (co)polymerisation reactions.

Divergent Catalytic Strategies for the Cis/Trans Stereoselective Ring-Opening Polymerization of a Dual Cyclic Carbonate/Olefin Monomer.

A dual seven-membered cyclic carbonate/olefin monomer was synthesized from CO2 and cis-1,4-butenediol and polymerized. The properties of the polymer were controlled using divergent catalytic strategies toward the stereochemistry of the olefin. Ring-opening polymerization of the cyclic carbonate using an organocatalytic approach retained the cis-stereoconfiguration of the olefin and yielded a hard semicrystalline polymer (Tm 115 °C). Ring-opening metathesis polymerization using Grubbs' catalyst proceeded with high trans-stereoregularity (95%) and produced a soft amorphous polymer (Tg -22 °C). Cis to trans isomerization of the polymer was possible using Cu(I) salts under UV light. In all polymers, the C═C double bond remained available for postpolymerization modification and thermoset resins were formed by cross-linking. From this single monomer, cis-trans-cis triblock copolymers, with potential applications as thermoplastic elastomers, were synthesized by combining both strategies using cis-1,4-butenediol as a chain transfer agent.

Bipyrrolidine salan alkoxide complexes of lanthanides: synthesis, characterisation, activity in the polymerisation of lactide and mechanistic investigation by DOSY NMR.

Four dimeric lanthanide alkoxide complexes bearing ONNO bipyrrolidine salan ligands (LMeH2/LtBuH2) have been prepared with Nd, Sm and Yb. Depending on the metal and substituents, these complexes adopt varying coordination geometries. While investigating the hydrolytic degradation of these complexes, three dimeric mixed alkoxide/hydroxide and bis-hydroxide products were also prepared, isolated and characterised. Despite paramagnetism, 1H NMR and diffusion ordered spectroscopy (DOSY) allowed additional characterisation alongside elemental and single-crystal X-ray diffraction analyses. These systems were very active for the controlled ring-opening polymerisation (ROP) of rac-lactide (LA), under industrially relevant melt conditions and in solution, yielding complete conversion within 5 minutes at [Ln] : [LA] ratios of up to 3000 : 1 in toluene, and at 80 °C, whilst retaining low dispersities (D = 1.1). 1H DOSY NMR spectroscopy was employed to monitor polymer growth from the metal centres in situ, and revealed a dinuclear catalytically active species.

Continuous Production of Biorenewable, Polymer-Grade Lactone Monomers through Sn-ß-Catalyzed Baeyer-Villiger Oxidation with H2 O2.

The Baeyer-Villiger oxidation is a key transformation for sustainable chemical synthesis, especially when H2 O2 and solid materials are employed as oxidant and catalyst, respectively. 4-substituted cycloketones, which are readily available from renewables, present excellent platforms for Baeyer-Villiger upgrading. Such substrates exhibit substantially higher levels of activity and produce lactones at higher levels of lactone selectivity at all values of substrate conversion, relative to non-substituted cyclohexanone. For 4-isopropyl cyclohexanone, which is readily available from ß-pinene, continuous upgrading was evaluated in a plug-flow reactor. Excellent selectivity (85 % at 65 % conversion), stability, and productivity were observed over 56 h, with over 1000 turnovers (mol product per mol Sn) being achieved with no loss of activity. A maximum space-time yield that was almost twice that for non-substituted cyclohexanone was also obtained for this substrate [1173 vs. 607 g(product) kg(catalyst)-1 cm-3 h-1 ]. The lactone produced is also shown to be of suitable quality for ring opening polymerization. In addition to demonstrating the viability of the Sn-ß/H2 O2 system to produce renewable lactone monomers suitable for polymer applications, the substituted alkyl cyclohexanones studied also help to elucidate steric, electronic, and thermodynamic elements of this transformation in greater detail than previously achieved.